Ashly NE8250.70BC

Ashly NE8250.70BC

The Ashly 8-Channel 2000W Network-Enabled Power Amplifier provides a minimum of 250W RMS power per channel into 70V loads when all channels are operational. It incorporates the pre-installed OPDAC8 internal 8-channel digital to analog converter and CobraNet network audio interface card. Utilizing an energy-efficient Class-D platform with a switching power supply, this amplifier ensures optimal performance and power distribution. In bridged-mono mode, channels 1+2, 3+4, 5+6, or 7+8 deliver over 500W RMS into a 140V load.

Ashly NE8250.70BC Features:

• Remote control and monitoring via 10/100 Ethernet
• 70V constant voltage output
• Input cards: CobraNet and OPDAC8
• DC voltage remote gain control
• Class-D output with switched-mode power supply
• Stepped and calibrated input attenuators
• Remote power standby feature
• Software-enabled disabling of all front panel controls
• Temperature-sensitive variable speed fan with front-to-back airflow
• Selectable high-pass filter (HPF) frequencies: 80 Hz, 400 Hz, off
• 4-stage level meters
• Output current and temperature indicators
• Safety/compliance certifications: cTUVus, CE, FCC, and RoHS

Ashly NE8250.70BC Specifications:

• Frequency Response: 20 Hz to 20 kHz, ± 1 dB
• Input Impedance: 20 kOhms, balanced
• Voltage Gain: 32 dB
• Input Sensitivity: 7.2 dBu
• Maximum Input Level: +21 dBu
• Software Control: 80 Hz (12 dB/oct), 400 Hz (6 dB/oct), Off
• Distortion: < 0.5 % typical (SMPTE and THD-N)
• Damping Factor: > 250 (8 Ohms, 1 kHz)
• Circuitry: Class D
• Maximum load protection: Overcurrent, Overvoltage, Temperature, Inrush Limiting, Mains Fuse
• Controls: Remote standby, Preset recall (4), Remote Level (8), Remote Data
• Connectors: Euroblock (each channel)
• AC Mains: 120 VAC or 240 VAC, ±10% 50 to 60 Hz
• Cable Connectors: 15 A Edison, 3-Prong IEC
• Signal to Noise Ratio: > 107 dB
• LED Indicators: Signal Level (Clip, -6 dB, -18 dB, -12 dB), Bridge, Temperature, Current
• Output: 250 W per channel
• Current Draw: Standby Mode: 290 mA, Idle: 565 mA, Typical: 5.00 A, Maximum: 11.0 A
• Thermal Dissipation: Standby Mode: 63.8 BTU/hr, Idle: 187 BTU/hr, Typical: 700 BTU/hr, Maximum: 775 BTU/hr
• Dimensions: 19 x 3.5 x 16″ (48 x 8.9 x 41 cm)
• Weight: 20 lb (9.1 kg)